Holiday Notice: We have team members taking vacation during the last week of May. We have backup staff to fulfill orders in their absence, but some orders may have a brief waiting period before they're shipped. We will communicate with customers regarding any delays. Thank you!

Numatx 3K Squeezer System - No Yoke

Numatx 3K Squeezer System - No Yoke (SKU: SNMTX3K)

  • $1,010.00

Out of stock

Product Description

If you?ve got rivets to set, you won?t find a better tool available than the Numatx HTC-3 rivet squeezing system. The Numatx squeezer is smaller and lighter than comparable pneumatic-only units and delivers constant force through the full stroke of the tool, meaning that you can set different lengths of rivets without stopping to change settings.

There is no adjustable ram? with the Numatx unit, you simply set the pressure for the rivet diameter that you are using, and rivet away. When the material thickness and rivet length change, you don?t have to adjust anything.

The unit?s compact size allows you to get into places you could not reach with a handheld or pneumatic-only unit. Set up to 1/8? aluminum solid rivets with up to 3,070 lbs. of force. The Numatx unit uses shop air up to 90psi, so you can use it anywhere you can get an air hose.

The handheld portion of the squeezer is fully hydraulic and weighs only one pound (without C-yoke). This unit accepts industry-standard Chicago Pneumatic CP214 type yokes, attached with included quick-release shear pins, and can be ordered with various c-yokes if you don?t already have compatible equipment.

Note: this item does not include rivet sets or a yoke.

An optional upgraded hydraulic hose from TS Flightlines replaces the larger, heavier rubber hydraulic hose that is standard in the kit. The TS hose is an 8" braided steel hose with clear coating to protect painted surfaces.

FAQ

Q: Does the Numatx unit need to be bled prior to use?

A: The Numatx units come pre-bled from the factory. It should be ready to work right out of the box. If you're not getting up to the pressure you expect, it is possible for a bit of air to get in the line when the bleed plug gets installed, so they are not always bled 100% perfect. A properly bled Numatx should set #3 rivets at around 40-45psi and #4 rivets at around 80-90psi.

Q: What fluid should I use?

A: Numatx recommends using Mobil Velocite No. 6, or a suitable alternative. Any hydraulic fluid that is safe for use with Buna O-rings would be suitable, including Dexron III and many automotive transmission fluids.



We Also Recommend