All Products ( 166 Items )

Used to set flush side of flush rivets. Made from 17-4 stainless steel. 3/16" shank for inserting into standard tooling. Flat "set" refers to an individual piece. (They "set" rivets)...

Select sizes needed via the drop down menu, one at a time. This size required for Van's RV kits. 426-3 426-4 See also screw sizes for #6, #8, and #10...

This size required for Van's RV kits. 509-6 509-8 See also -3 and -4 Rivet Sizes Springback angle on both die faces. Minimizes skin deformation. Skins remain very flat! Precision...

Deburring bit with hex shank fits into a cordless screw driver.  100 degree, one-hole chatterless deburring bit with intergral 1/4" hex shank. A cordless screwdriver is very controllable and makes...

This is a tool that REALLY WORKS!  Roller shape forms a slightly turned edge on aluminum to assure a tight fit along the joints of overlapping sheets.  Hardened stainless rollers...

Gauge measures -3, -4, -5 and -6 universal head and flush rivets. Used to check proper length of exposed rivet shank BEFORE setting. Used to check proper length and width...

Close-quarters die allows access to holes where there is not clearance for a squeezer or c-frame. Just what you need for tight spots. Pull die mandrel with pop riveting tool...

Used for setting flush rivets from the back side 1/2" dia. flush set with slim DELRIN spring tension sleeve Tension sleeve safely holds both layers of aluminum tightly together while...

 Screws to workbench.  Overhangs enough to allow rib flange to slide over.  Machined springback 3/32" (#40) female die built in.  Use standard 3/32" male die in rivet gun set or C-frame...

Lightweight hand squeezer for dimpling skins and squeezing rivets30% Lighter Weight, 65% Less Effort Required!  This squeezer outperforms all other squeezers on the market. As with all of the tools...

Designed to maintain desired angle while countersinking the trailing wedge found in various Van's aircraft kits including models RV7, 9, 10, and 14. The drill jig is designed for wedge strips...

2.8 lb custom bar. Special Bucking Bar called for in the RV-10 Empennage manual (Page 9-12) or RV-14 manual (page 09-17 for dimensions and 09-20 for use). Machined finish is...

Cleaveland Aircraft Tool's C-Frame is a combination of the best features of several tools! It can be used for both dimpling and setting rivets. It's thoughtful design assures perpendicular placement...

Spring back angle on both die faces. Minimizes skin deformation. Skins remain very flat! Precision manufactured. Stainless Steel - Heat treated. Polished dimpling surfaces. Don't make 14,000 mistakes on your...

Manifold Block (SKU: ACM13IB) with 1-in port and 3-out. Mounts to bench or wall providing multiple outlets for tools. Your existing standard air hose connects to manifold to supply air....

1.25" Gauge Graduated 0-50psi.  Useful Range 10-60psi 1/4" FPT Air Inlet Air Outlet fits standard Schrader Valve - Push Straight On Access valve stem through small (3/4") hole in wheel...

Adjustable length ram eliminates the need for shim washers and various length sets.  When using with 1.25" thick yoke bases or longeron yoke use a 1/2" long flat set or...

? RV3 Canopy Cover. Canopy Covers are made from unique very lightweight fabric. The silver gray fabric reflects heat and sheds water yet breathes (lets water vapor evaporate from underneath)....